Astro Machine ASTROJET 2600P Manual de usuario descargar pdf (Pagina 12)

SECTION 3

CREATING A LAYOUT

saved to the list as a Standard size for future use. More information about this feature can be found in this

section under “Stock Properties”.

Printing Bands

When you click on OK, the “Layout Editor – Untitled” window will open. This window will contain a layout

that you will use to set up your template. Each of the AstroJet printers have different configurations of print

heads. The printers are configured as follows:

Printer Heads Configuration

AstroJet 1000-4 4 heads in two banks Heads 1 and 2 are attached to Printing Band 3, Head 4 is

separate and opposite of the other heads. There is a 1 3/4” gap

between Head 3 and Head 4.

AstroJet 1000-5 5 heads in two banks Heads 1 and 2 are attached to Printing Band 3, Head 4 is

attached to Head 5. The is a 1 5/16” gap between Head 3 and

Head 4.

AstroJet 1000 5 heads in two banks Heads 1 and 2 are attached to Printing Band 3, Head 4 is

attached to Head 5. The is a 1 5/16” gap between Head 3 and

Head 4 (Current version with diagnostic BIOS)

AstroJet 2000 5 heads in four banks Heads 1 and 6 face each other and are separated by a 1-3/4”

gap. Head 2 is attached to Head 3 and Head 4 is attached to

Head 5. The face each other and are separated by a 1-3/4” gap.

AstroJet 2600 6 heads in four banks Head 1 and heads 4 and 5 face each other on the same rail.

Head 6 is no a separate rail and faces heads 2 and 3. The heads

can be combined into one continuous strip 3-inches wide.

AstroJet 2800 8 heads in four banks Head 1 and heads 5, 6, and 7 face each other on the same rail.

Head 8 and heads 2, 3, and 4 face each other on the other rail.

The heads can be combined into one continuous strip 4 inches

wide.

*AstroJet 3,

3000-6 and 3600

6 heads in three banks Head 1 is separate from the other heads and is placed opposite

of Head 5 which is attached to Head 6. There is a 1-3/4” gap

between Head 1 and Head 5. Heads 2 and 3 are attached to

Head 4 on a separate shaft.

*AstroJet 3 +,

3000-8 and 3800

8 heads in four bans Head 1 is separate from the other heads and is placed opposite

of Head 5 which is attached to Head 6. There is a 1-3/4” gap

between Head 1 and Head 5. Heads 2 and 3 are attached to

Head 4 on a separate shaft. Head 7 is attached to Head 8 and is

positioned opposite Heads 3,4,and 5. There is a 1-3/4” gap

between these two sets of heads.

AstroJet Image

Blaster

*6 heads

8 heads

Same configuration as AstroJet 3

Same configuration as AstroJet 3+

AstroJet Imaging

System II

8 heads in four bands Same configuration as AstroJet 3+

*NOTE: The AstroJet 3, 3+, 3000-6, and 3000-8 all use the same layout AstroJet III. When using an

AstroJet 3 or 3000-6 go to S

etup, then click on Print head. The “Layout Editor – Print Head Properties

window will open. Turn off heads 7 and 8 by deselecting them. This also applies to an AstroJet Image

Blaster with 6 print heads.

Using the Supplied Template

If you choose you may also start by selecting Open from the file menu, then Select “Template AJ III

FWD.AJPJT”, and click OK. Next select Change Database and when the “***Warning***” window appears

click OK. The “Select Database” window will open. Select the database you wish to use and click OK.

Immediately select Save A

s… from the File menu and give the template another name. This will preserve the

original template for future use. This technique is particularly useful when Reverse Printing.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comentarios a estos manuales

Sin comentarios

Astro Machine ASTROJET 2600P Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Astro Machine ASTROJET 2600P